600mm Diameter SS Vertical Cyclone Separator

Stainless Steel, Cyclone Separator , Screen The Grease And Solids Discharged From The Screw Press

The hydrocyclone is a device for separating and removing substances such as heavier coarse-grained silt from sewage. Sometimes used for mud dewatering. It is divided into two types: pressure type and gravity type. It is usually made of circular column structure or metal tube. The water enters the tangential line from the upper part of the structure (or metal tube) by pressure or gravity. Under the action of centrifugal force, the coarse and heavy particulate matter is thrown to the wall and rotated downward to discharge together with the formed concentrated liquid. The smaller particulate matter is rotated to a certain extent and then discharged with the secondary upper vortex.

The oil slag separator produced by Jiangsu Sunrise is used to screen the grease and solids discharged from the screw press. It has the characteristics of large processing capacity, good separation effect and convenient maintenance.

Washing:

The spray dust removal equipment is in which the water in the dust removal equipment is sprayed into a mist through the nozzle. When the dust-containing flue gas passes through the mist space, due to the collision, interception and aggregation between the dust particles and the droplets, the dust particles follow the droplets. Landed down. 　　

This kind of dust removal equipment has simple structure, low resistance and convenient operation. Its outstanding advantage is that there are very small gaps and holes in the dust removal equipment, which can handle flue gas with high dust concentration without causing blockage. And because the sprayed droplets are thicker, it does not need a spray nozzle, which is more reliable. The spray-type dust removal equipment can use circulating water until the particulate matter in the lotion reaches a fairly high level, which greatly simplifies Water treatment facilities. So this kind of dust removal equipment is still used by many enterprises. Its disadvantages are that the equipment is relatively bulky, the ability to process fine dust is relatively low, and the amount of water required is relatively large, so it is often used to remove flue gas with large dust particle size and high dust concentration. 　　

The commonly used spray dust removal equipment is divided into three structures according to the flow pattern of gas and liquid in the dust removal equipment: 　　

(1) Downstream spray type, that is, gas and water droplets flow in the same direction 　　

(2) Countercurrent spray type, that is, the liquid is sprayed against the airflow 　　

(3) Cross-flow spray type, that is, spray liquid in the direction perpendicular to the airflow.