ISO9001 JIE 50t/H Carbon Steel Meat Bone Crusher

Model Is YPS1575B-1 Rendering Pre-Crusher Rendering Plant Crusher

Crusher is used for crushing the whole animal carcasses, and various internal organs and bones from slaughterhouses. Generally use crusher to reduce the size of the material and then delivery by screw conveyor or vane pump before cooking. The motor model and the speed of the crushing shaft can be adjusted according to the production demand, the operation cost is low.The design of quick repair and replacement parts makes the crusher more efficient.

Main Features:

1) low speed axis can handle metals in raw materials.

2) equipped with electronic speed monitoring, the motor can be stopped immediately when large matter enter the crusher.

3) the spindle is equipped with heavy roller bearings, which can resist large radial and axial impact.

The advantages of the hammer crusher are:

large crushing ratio (generally 10-25, higher up to 50), high production capacity, uniform products, less over-powder phenomenon, low energy consumption per product, simple structure, light equipment, and operation Easy maintenance etc. The hammer crusher series products are suitable for crushing various medium hardness and brittle materials, such as limestone, coal, salt, white submerged, gypsum, alum, brick, tile, coal gangue, etc. The compressive strength of the crushed material does not exceed 150 MPa.

This machine is mainly used in cement, coal preparation, power generation, building materials and compound fertilizer industries. It can crush raw materials of different sizes into uniform particles to facilitate the processing of the next process. It has reliable mechanical structure, high production efficiency and good applicability. The disadvantages of the hammer crusher are: the hammer head and the grate bar screen wear quickly, and the maintenance and balance time are long. When crushing hard materials, the wear is faster; when crushing sticky and wet materials, it is easy to block the grate bar screen gap, which is easy Causes downtime (the water content of the material should not exceed 10%). When crushing hard objects, the hammer head and liner are worn out and consume a lot of metal materials. Frequent replacement of wearable parts requires more maintenance time. When crushing sticky and wet materials, the grate is easy to block and reduce production capacity. The hammer crusher is used to crush various medium-hard and weakly abrasive materials.

The compressive strength of the material does not exceed 100MPa, and the moisture content is less than 15%. The crushed materials are coal, salt, chalk, gypsum, bricks, limestone, etc.　The main working part of the ring hammer crusher is a rotor with a hammer (also known as a hammer head)