Feather Squeezer Stainless Steel 11kw Poultry Waste Rendering Plant

Feather Squeezer Stainless Steel Feather Meal Processing Equipment

Complete set of equipment for the processing automation, totally enclosed treatment process with no pollution and treatment results for environmental protection, harmless treatment, recycling, high utilization have been concerned. All the suits are praised by the users of the suit.

Industrial dehydration machines are generally three-legged pendulum structure, three-legged with springs to avoid uneven load The vibration caused by the balance. The inner shell is made of stainless steel plate, which is strong and durable. Braking is generally installed with a brake opening and closing arm, which has good braking performance, safety and reliability. It adopts triangular belt drive, and the motor drives the starting wheel to slowly start to the normal speed, running smoothly without vibration. (Two) parameter introduction Main technical features of industrial dehydrator: 1. It adopts three-legged suspension structure, which has better shock-absorbing effect. 2. The starting wheel structure is installed under the shaft, which makes the inner tank gradually accelerate when starting, so as not to overload the motor. 3. The inner tank is balanced and calibrated, running smoothly, safe and reliable. 4. The braking is stable, the dehydration rate is high, and the operation is simple. (3) Automatic material lifting dewatering machine Automatic material lifting dewatering machine is mainly used for the final process after cyclic rough washing, crushing washing, and rinsing, to replace manual fishing, and add first-level washing and automatic high-speed dehydration functions to save labor, improve cleaning quality, and save power consumption At the same time, it can be matched with the automatic conveying device to form a higher level of automatic assembly line production. (4) Principle of construction The main body of the dewatering machine is a filter device formed by stacking a fixed ring and a moving ring with a screw shaft passing through it. The front section is the concentration section, and the rear section is the dehydration section. The filter gap formed between the fixed ring and the moving ring and the pitch of the screw shaft gradually decrease from the concentration part to the dehydration part. While the rotation of the screw shaft pushes the sludge from the thickening section to the dewatering section, it also continuously drives the traveling ring to clean the filter gap to prevent clogging. After the sludge is concentrated by gravity in the thickening section, it is transported to the dewatering section. As the filter gap and pitch gradually become smaller, and the back pressure plate is blocked, a great internal pressure is generated and the volume is continuously reduced. , To achieve the purpose of full dehydration