Feather Squeezer 10500L/H Animal Rendering Plant

Model Is YMJS0211-01 Feather Squeezer Feather Meal Processing Equipment

Introduction

Screw extrusion dehydrator is a main equipment used for coagulation and dehydration. It is mainly composed of a screw, a cylindrical cage shell and a cone. The screw shaft and the output shaft of the reducer are connected by a flexible coupling. Host structure and the role of each componentedit The dehydrator is mainly composed of a screw, a cylindrical cage shell and a cone.

The screw shaft and the output shaft of the reducer are connected by a flexible coupling.

1. Screw It consists of pitch threads and collars alternately sleeved on the screw shaft. Each thread and collar are respectively keyed on the screw shaft. Except for the first section (feeding zone), which is a three-turn equal-distance continuous thread, the other sections are single-turn open, and the pitch of each pitch is different. It gradually decreases from the low pressure side to the high pressure side, and the hub diameter gradually increases. To increase the pressure, so as to squeeze out the water in the rubber.

2. Cylindrical energy shell It is composed of a castor board composed of cage bars fixed on the frame. The grate board is divided into 8 sections, each of varying length. The inner diameter of the cylinder is 18 inches. It is divided into two halves on the vertical centerline and fastened by bolts for easy removal for cleaning and maintenance. The cage bars that make up the castor board are separated by spring sheets to form longitudinal slits to allow water to flow out. There are scrapers on the skeletons on the upper and lower sides of the cylinder, corresponding to the position of the collar on the screw. Its function is to prevent the rubber from rotating with the screw, forcing the rubber to change the direction and position of the advancement, and forming a loose and porous shape. Conducive to drying. There are four jackets for heating or cooling on the outside of the cylinder, and the temperature in the machine can be controlled in zones according to process requirements. In the production of styrene-butadiene rubber, it is only used when steam is used to preheat the body before driving.